IndustryWeek.com
Leadership in Manufacturing
ADVERTISE  |   NEWSLETTERS  |   RSS  IndustryWeek magazine
FORUMS  |   VIDEOS  |   WEBINARS  |   WHITE PAPERS  |   EVENTS
IndustryWeek Forums  
  #1  
Old 12/17/2009, 02:26 PM
mgavoor mgavoor is offline
mgavoor
 
Join Date: Dec 2009
Posts: 3
mgavoor is on the way to success
Default The Ramp-Up Cometh… Maybe

In October 2008, the US economy melted down and dragged the world with it into the biggest recession since the great depression. As sales abruptly fell 10, 20, and even 30%, companies were stuck with inventory in their stores, distribution centers, and en route from Asia. Supply Chain executives led the immediate charge to:

• Cancel existing orders, even if goods were in production
• Put in more rigorous review processes to order any more goods
• Recalculate the re-order points and quantities

Inventory was bled down, mix changes due to economic conditions were evaluated, orders for goods were placed more sparingly. Let’s consider two government statistics for Manufacturing and Trade Inventories. At the end of Q3 2008, inventories were $1,396.5 B and the Inventory to Sales Ratio was 1.39. In July of 2009, inventories had dropped to $1,313.9 B and the Inventory to Sales Ratio was 1.42. So, we had an $82.6 B drop in inventory and sales fell $1,004.7B to $925.3 B or $79.4 B.

So we tightened the belt. We let sales bring down the inventories. We were certainly doing this until July, here are the numbers reported in this October 2009 report (http://www.bea.gov/scb/pdf/2009/10%2...r/1009_isr.pdf).

Now, we are starting to see something else happening.
We are seeing cases of demand ramping up faster than lead times can react. We are seeing out-of-stock situations in a few cases. This raises a few questions and concerns.

1. As mentioned above, the ramp down of inventories was simply a matter of reducing orders and letting sales bleed down the inventory to the new norm. It took longer than management probably wanted but it worked. It was steady and customer service did not suffer unless the sales mix shifted drastically to lower priced goods. The long lead times from Asia made the ramp down slow.

2. The meltdown happened very fast it was impossible to predict simply using demand planning. As a result most companies had to react quickly and they did just that.

3. What if the few examples we are seeing is an early indicator that things might heat up quickly? Will demand ramp up faster than the long lead times will allow us to react? Do we bring up inventories now? If we do and sales are flat we will look inept.

4. My guess is most of us will err on the side of caution.
The recession has been a tough trek for shareholders, employees, and consumers. But from an inventory standpoint, it was relatively smooth for the companies that were on top of it, changed their policies, and let the market bleed down inventories. The ramp up could be a much bumpier ride than the ramp down.

On our blog site http://blog.demandcaster.com/ we are able to give you a picture graph as a real life example from our DemandCaster software tool that illustrates what we are seeing. It shows that in Q4 of both 2007 and 2008, demand decreased. In 2008, demand decreased to what appeared to be a lower norm of sales. There was every reason to believe that sales would decrease again in Q4 of 2009 but they did not in October and November. Sales increased, causing stress in the planning process. The product is still in stock but there is not much safety in the inventory level. The question no one can answer is whether this is a random spike or if sales are returning, as the forecast now indicates, to pre-recession levels. What would you do? What would you order? We are recommending to raise inventory on this item since ramping down, if needed, is less easier and less painful than going out-of-stock.

No one ever said this was easy.

I would be interested in hearing your thoughts on this and invite you to leave your comments and/or questions here or at our blog site.
Reply With Quote
  #2  
Old 12/24/2009, 02:28 PM
hmoser hmoser is offline
Harry Moser
 
Join Date: Sep 2008
Location: Kildeer, IL
Posts: 7
hmoser is on the way to success
Default Re: The Ramp-Up Cometh… Maybe

I agree that it is better to have a little extra inventory than to lose orders and market share. There is a way to both have low inventory and respond to a surge in sales: source products local to where you assemble or deliver them!
In your article, you mentioned the impact of long Asian pipelines on inventory planning. Three U.S. manufacturing trade associations are doing something real to shorten pipelines and create jobs in the U.S. and anyone reading this can help! The NTMA (National Tooling and Machining Association), PMA (Precision Metalforming Association) and AMT (Association for Manufacturing Technology), with promised support from NAM, are holding a Re-Shoring Purchasing Fair in Irvine, CA on May 12, 2010. See https://www.ntma.org/eweb/ProfilePag...3-f3ec1d9e8fcc and click on Event Information. Large companies will bring out work that is now off-shored. Hundreds of attending U.S. shops will then bid on the work. We anticipate bringing substantial work back. If the shops fail to be competitive, we will document the reasons and use the documentation to strengthen demands for other countries to raise their currency or for the U.S. to take unilateral trade action.
You can help several ways:
1. If your company now off-shores machining or tooling production, contact me and I will provide details on the Fair for you to forward to your Supply Chain Manager or Purchasing Dept.
2. If you have been involved with a successful re-shoring, contact me with the information. We are planning a continuing surge of published case histories on successful re-shorings so that OEMs understand that the new trend is to bring work back and produce it locally.
The time is right for this effort to succeed! The $ is down vs. many currencies. JIT and R&D are best supported, and carbon footprint minimized, by local sourcing.
You can reach me at harry.moser@us.gfac.com
Harry Moser, Chairman Emeritus, Agie Charmilles
Reply With Quote
Reply

Tags
demand, demand planning, inventory, inventory management, manufacturing

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 03:05 AM.


Copyright© 1998-2010 Penton Media, Inc. All rights reserved.

Add To del.icio.us  del.icio.us
Digg this  Digg this
Googleize this post  Googleize
Save to Newsvine  Newsvine
Add to reddit  reddit
Add to MyWeb  Yahoo MyWeb